If you’ve ever considered utilizing a storage area floor epoxy system to safeguard and enhance the look of your garage area floor, there are many things you need to understand before purchasing one. Most diy stores take epoxy floor kits designed for the do-it-yourselfer and you’ve probably heard differing viewpoints how well they work. Some will say it’s a great product among others will let you know not to spend your cash. Well, there exists usually an easy explanation as to why this product fails for a few floors.
One reason behind failure is don’t assume all concrete floor is suitable for making use of an epoxy layer. Many floor surfaces have too much hydrostatic pressure, signifying water moves from the under the slab up to the surface in a process called capillary action. Moisture then collects on the surface, which breaks the bond between the concrete and the epoxy coating. If the floor “sweats” even when it’s dry exterior or there are areas that seem to be to stay moist for extended periods of time, then an epoxy covering will likely fail. It’ll steadily chip and flake away. Even if you don’t think there’s a moisture problem, it’s a good idea to use an efflorescence or salt blocker before the epoxy. This will help prevent moisture from creating problems.
The most probable reason for failing is incorrect surface preparation. The floor must be completely clean and stripped of most other coatings. Any discolorations or foreign substances (engine oil, grease, paint, etc.) will prevent sufficient bonding between the concrete and epoxy, leading to chipping and flaking. Most contractors will apply a jacket of sealer to a garage area floor after set up. Normally it takes many years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acidity etching can be an important step, it will not remove sealer and most stains. Etching will only start the pores of bare concrete, therefore you must do all cleaning and stripping before etching with acidity.
Before purchasing a garage area floor epoxy system, you will need to first decide if your floor is right for it. If it sweats often or there are areas that are constantly damp, then just forget about it. Be sure that you are prepared to take the time to prep the floor properly, as this is the most significant part. It also really helps to put a couple of coats of clear concrete sealer on top to serve as a wear jacket. Water structured acrylic sealers are well suited for indoor personal use. Despite any bad reviews you’ve found out about the do-it-yourself storage area floor epoxy system, it can be a successful project if it’s done correctly.